97 BPM

97 beats per minute is one beat every 618.56 ms. Below: bar and phrase lengths, delay and reverb times, LFO rates, the genres that use this tempo, and the pitch change needed to mix in from nearby tempos. Start the metronome or tap along to a track to check it is really 97.

Updated 2026-10-17

97 BPM

The interactive tool loads when JavaScript is available. The complete guide remains readable below.

Beat, bar and phrase lengths at 97 BPM

At 97 BPM one beat lasts 618.56 ms and a 4/4 bar lasts 2.474 s. The beat is not a whole number of milliseconds, so round to the nearest 0.1 ms when you type times in by hand, or use your plugin's tempo sync. That is 1.617 beats per second, or 24.25 bars of 4/4 per minute.

Dance tracks are usually arranged in 8-, 16- and 32-bar phrases. At 97 BPM a 16-bar phrase takes 39.59 s and a 32-bar intro or outro takes 1:19.2 min. That is 7.59 s longer than the same 16 bars at 120 BPM. A six-minute track at this tempo contains about 146 bars.

LengthTimeMilliseconds
1 beat0.619 s618.56 ms
1 bar (4 beats)2.474 s2474.23 ms
4 bars9.897 s9896.91 ms
8 bars19.79 s19793.81 ms
16 bars39.59 s39587.63 ms
32 bars1:19.2 min79175.26 ms
64 bars2:38.4 min158350.52 ms

Delay times at 97 BPM

Straight values follow the beat; dotted values are 1.5 times as long and triplets are two-thirds as long. At 97 BPM the popular dotted-eighth delay is 463.92 ms and a quarter-note slapback is 618.56 ms. The Hz column is the matching rate for an LFO, tremolo or auto-pan synced to the straight note.

NoteStraightDottedTripletRate (straight)
1/1 (one 4/4 bar)2474.23 ms3711.34 ms1649.48 ms0.404 Hz
1/21237.11 ms1855.67 ms824.74 ms0.808 Hz
1/4 (one beat)618.56 ms927.84 ms412.37 ms1.617 Hz
1/8309.28 ms463.92 ms206.19 ms3.233 Hz
1/16154.64 ms231.96 ms103.09 ms6.467 Hz
1/3277.32 ms115.98 ms51.55 ms12.933 Hz

Reverb times at 97 BPM

A common way to keep a reverb in time is to tie its pre-delay to a short note value and let the tail fade within a longer one. At 97 BPM a 1/64-note pre-delay is 38.66 ms and a 1/32-note pre-delay is 77.32 ms.

The decay control on most reverbs is RT60, the time it takes the tail to fall by 60 dB, so the audible tail ends earlier than the number shown. Treat these values as starting points and adjust by ear.

Reverb characterPre-delayDecay (RT60)
Tight room on drums38.66 ms618.56 ms
Medium plate on vocals77.32 ms1237.11 ms
Large hall or pad wash77.32 ms2474.23 ms
Ambient tail over two bars154.64 ms4948.45 ms

Genres at 97 BPM

97 BPM is a relaxed, mid-slow tempo. It sits near the upper end of the ambient/downtempo range (60–100), near the upper end of the hip-hop range (70–100), near the upper end of the reggae/dub range (70–100), near the upper end of the reggaeton/dembow range (88–100) and near the low end of the pop range (90–130).

Counted at double-time (194 BPM) it matches hardcore/gabber. A detector or a tag in your library may report either reading, so check by ear which one the drums suggest.

These ranges are common practice rather than rules: genre is decided by rhythm, sound and scene as much as by tempo, and plenty of tracks sit outside the usual numbers.

  • Ambient/downtempo: typically 60–100 BPM — beatless ambient may not have a useful BPM at all.
  • Hip-hop: typically 70–100 BPM — boom-bap often sits around 85–95.
  • Reggae/dub: typically 70–100 BPM — the off-beat skank can make the pulse feel faster than it is.
  • Reggaeton/dembow: typically 88–100 BPM — the dembow rhythm repeats every beat, so the tempo is easy to hear.
  • Pop: typically 90–130 BPM — a wide band; the genre is defined by songwriting, not tempo.

Mixing into 97 BPM

To bring a track at another tempo up or down to 97 BPM, move its pitch fader by the percentage below. Without key lock the key moves too, by the number of semitones shown; about 6 % is one semitone, so changes beyond that are where key lock (master tempo) starts to matter.

A ±8 % pitch fader on a track at 97 BPM reaches 89.2–104.8 BPM; a ±16 % range reaches 81.5–112.5 BPM.

Track tempoPitch change to reach 97Key shift without key lock
91 BPM+6.59 %+1.11 st
93 BPM+4.3 %+0.73 st
95 BPM+2.11 %+0.36 st
96 BPM+1.04 %+0.18 st
98 BPM−1.02 %−0.18 st
99 BPM−2.02 %−0.35 st
101 BPM−3.96 %−0.7 st
103 BPM−5.83 %−1.04 st

Half-time, double-time and nearby tempos

Half-time of 97 BPM is 48.5 BPM and double-time is 194 BPM.

48.5 BPM is outside the 60–200 range of these pages; the half/double-time converter works with any value.

Each 1 BPM step at this tempo changes the beat by about 6.31 ms, so neighbouring tempos are close enough to beatmatch with a small pitch move.

Frequently asked questions

How many milliseconds is one beat at 97 BPM?
One beat (a quarter note) at 97 BPM is 60,000 ÷ 97 = 618.56 ms. A 4/4 bar is four beats, 2474.23 ms.
What is the dotted eighth delay time at 97 BPM?
A dotted 1/8 delay at 97 BPM is 463.92 ms: an eighth note (309.28 ms) multiplied by 1.5. A straight quarter-note delay is 618.56 ms and a quarter-note triplet is 412.37 ms.
What genre is 97 BPM?
Ambient/downtempo, hip-hop, reggae/dub, reggaeton/dembow and pop commonly use 97 BPM. Genre ranges overlap, so the drum pattern and sound decide the style more than the number does.
What is 97 BPM in Hz?
97 BPM is 1.6167 Hz when one cycle equals one beat. An LFO synced to one bar runs at 0.4042 Hz, and one synced to sixteenth notes at 6.467 Hz.