102 BPM
102 beats per minute is one beat every 588.24 ms. Below: bar and phrase lengths, delay and reverb times, LFO rates, the genres that use this tempo, and the pitch change needed to mix in from nearby tempos. Start the metronome or tap along to a track to check it is really 102.
Updated 2026-10-17
102 BPM
The interactive tool loads when JavaScript is available. The complete guide remains readable below.
Beat, bar and phrase lengths at 102 BPM
At 102 BPM one beat lasts 588.24 ms and a 4/4 bar lasts 2.353 s. The beat is not a whole number of milliseconds, so round to the nearest 0.1 ms when you type times in by hand, or use your plugin's tempo sync. That is 1.7 beats per second, or 25.5 bars of 4/4 per minute.
Dance tracks are usually arranged in 8-, 16- and 32-bar phrases. At 102 BPM a 16-bar phrase takes 37.65 s and a 32-bar intro or outro takes 1:15.3 min. That is 5.65 s longer than the same 16 bars at 120 BPM. A six-minute track at this tempo contains about 153 bars.
| Length | Time | Milliseconds |
|---|---|---|
| 1 beat | 0.588 s | 588.24 ms |
| 1 bar (4 beats) | 2.353 s | 2352.94 ms |
| 4 bars | 9.412 s | 9411.76 ms |
| 8 bars | 18.82 s | 18823.53 ms |
| 16 bars | 37.65 s | 37647.06 ms |
| 32 bars | 1:15.3 min | 75294.12 ms |
| 64 bars | 2:30.6 min | 150588.24 ms |
Delay times at 102 BPM
Straight values follow the beat; dotted values are 1.5 times as long and triplets are two-thirds as long. At 102 BPM the popular dotted-eighth delay is 441.18 ms and a quarter-note slapback is 588.24 ms. The Hz column is the matching rate for an LFO, tremolo or auto-pan synced to the straight note.
| Note | Straight | Dotted | Triplet | Rate (straight) |
|---|---|---|---|---|
| 1/1 (one 4/4 bar) | 2352.94 ms | 3529.41 ms | 1568.63 ms | 0.425 Hz |
| 1/2 | 1176.47 ms | 1764.71 ms | 784.31 ms | 0.85 Hz |
| 1/4 (one beat) | 588.24 ms | 882.35 ms | 392.16 ms | 1.7 Hz |
| 1/8 | 294.12 ms | 441.18 ms | 196.08 ms | 3.4 Hz |
| 1/16 | 147.06 ms | 220.59 ms | 98.04 ms | 6.8 Hz |
| 1/32 | 73.53 ms | 110.29 ms | 49.02 ms | 13.6 Hz |
Reverb times at 102 BPM
A common way to keep a reverb in time is to tie its pre-delay to a short note value and let the tail fade within a longer one. At 102 BPM a 1/64-note pre-delay is 36.76 ms and a 1/32-note pre-delay is 73.53 ms.
The decay control on most reverbs is RT60, the time it takes the tail to fall by 60 dB, so the audible tail ends earlier than the number shown. Treat these values as starting points and adjust by ear.
| Reverb character | Pre-delay | Decay (RT60) |
|---|---|---|
| Tight room on drums | 36.76 ms | 588.24 ms |
| Medium plate on vocals | 73.53 ms | 1176.47 ms |
| Large hall or pad wash | 73.53 ms | 2352.94 ms |
| Ambient tail over two bars | 147.06 ms | 4705.88 ms |
Genres at 102 BPM
102 BPM is a moderate tempo, a little below the usual club range. It sits in the middle of the pop range (90–130).
These ranges are common practice rather than rules: genre is decided by rhythm, sound and scene as much as by tempo, and plenty of tracks sit outside the usual numbers.
- Pop: typically 90–130 BPM — a wide band; the genre is defined by songwriting, not tempo.
Mixing into 102 BPM
To bring a track at another tempo up or down to 102 BPM, move its pitch fader by the percentage below. Without key lock the key moves too, by the number of semitones shown; about 6 % is one semitone, so changes beyond that are where key lock (master tempo) starts to matter.
A ±8 % pitch fader on a track at 102 BPM reaches 93.8–110.2 BPM; a ±16 % range reaches 85.7–118.3 BPM.
| Track tempo | Pitch change to reach 102 | Key shift without key lock |
|---|---|---|
| 96 BPM | +6.25 % | +1.05 st |
| 98 BPM | +4.08 % | +0.69 st |
| 100 BPM | +2 % | +0.34 st |
| 101 BPM | +0.99 % | +0.17 st |
| 103 BPM | −0.97 % | −0.17 st |
| 104 BPM | −1.92 % | −0.34 st |
| 106 BPM | −3.77 % | −0.67 st |
| 108 BPM | −5.56 % | −0.99 st |
Half-time, double-time and nearby tempos
Half-time of 102 BPM is 51 BPM and double-time is 204 BPM.
51 BPM and 204 BPM are outside the 60–200 range of these pages; the half/double-time converter works with any value.
Each 1 BPM step at this tempo changes the beat by about 5.71 ms, so neighbouring tempos are close enough to beatmatch with a small pitch move.
Frequently asked questions
- How many milliseconds is one beat at 102 BPM?
- One beat (a quarter note) at 102 BPM is 60,000 ÷ 102 = 588.24 ms. A 4/4 bar is four beats, 2352.94 ms.
- What is the dotted eighth delay time at 102 BPM?
- A dotted 1/8 delay at 102 BPM is 441.18 ms: an eighth note (294.12 ms) multiplied by 1.5. A straight quarter-note delay is 588.24 ms and a quarter-note triplet is 392.16 ms.
- What genre is 102 BPM?
- Pop commonly uses 102 BPM. Genre ranges overlap, so the drum pattern and sound decide the style more than the number does.
- What is 102 BPM in Hz?
- 102 BPM is 1.7 Hz when one cycle equals one beat. An LFO synced to one bar runs at 0.425 Hz, and one synced to sixteenth notes at 6.8 Hz.