73 BPM
73 beats per minute is one beat every 821.92 ms. Below: bar and phrase lengths, delay and reverb times, LFO rates, the genres that use this tempo, and the pitch change needed to mix in from nearby tempos. Start the metronome or tap along to a track to check it is really 73.
Updated 2026-10-17
73 BPM
The interactive tool loads when JavaScript is available. The complete guide remains readable below.
Beat, bar and phrase lengths at 73 BPM
At 73 BPM one beat lasts 821.92 ms and a 4/4 bar lasts 3.288 s. The beat is not a whole number of milliseconds, so round to the nearest 0.1 ms when you type times in by hand, or use your plugin's tempo sync. That is 1.217 beats per second, or 18.25 bars of 4/4 per minute.
Dance tracks are usually arranged in 8-, 16- and 32-bar phrases. At 73 BPM a 16-bar phrase takes 52.6 s and a 32-bar intro or outro takes 1:45.2 min. That is 20.6 s longer than the same 16 bars at 120 BPM. A six-minute track at this tempo contains about 110 bars.
| Length | Time | Milliseconds |
|---|---|---|
| 1 beat | 0.822 s | 821.92 ms |
| 1 bar (4 beats) | 3.288 s | 3287.67 ms |
| 4 bars | 13.15 s | 13150.68 ms |
| 8 bars | 26.3 s | 26301.37 ms |
| 16 bars | 52.6 s | 52602.74 ms |
| 32 bars | 1:45.2 min | 105205.48 ms |
| 64 bars | 3:30.4 min | 210410.96 ms |
Delay times at 73 BPM
Straight values follow the beat; dotted values are 1.5 times as long and triplets are two-thirds as long. At 73 BPM the popular dotted-eighth delay is 616.44 ms and a quarter-note slapback is 821.92 ms. The Hz column is the matching rate for an LFO, tremolo or auto-pan synced to the straight note.
| Note | Straight | Dotted | Triplet | Rate (straight) |
|---|---|---|---|---|
| 1/1 (one 4/4 bar) | 3287.67 ms | 4931.51 ms | 2191.78 ms | 0.304 Hz |
| 1/2 | 1643.84 ms | 2465.75 ms | 1095.89 ms | 0.608 Hz |
| 1/4 (one beat) | 821.92 ms | 1232.88 ms | 547.95 ms | 1.217 Hz |
| 1/8 | 410.96 ms | 616.44 ms | 273.97 ms | 2.433 Hz |
| 1/16 | 205.48 ms | 308.22 ms | 136.99 ms | 4.867 Hz |
| 1/32 | 102.74 ms | 154.11 ms | 68.49 ms | 9.733 Hz |
Reverb times at 73 BPM
A common way to keep a reverb in time is to tie its pre-delay to a short note value and let the tail fade within a longer one. At 73 BPM a 1/64-note pre-delay is 51.37 ms and a 1/32-note pre-delay is 102.74 ms.
The decay control on most reverbs is RT60, the time it takes the tail to fall by 60 dB, so the audible tail ends earlier than the number shown. Treat these values as starting points and adjust by ear.
| Reverb character | Pre-delay | Decay (RT60) |
|---|---|---|
| Tight room on drums | 51.37 ms | 821.92 ms |
| Medium plate on vocals | 102.74 ms | 1643.84 ms |
| Large hall or pad wash | 102.74 ms | 3287.67 ms |
| Ambient tail over two bars | 205.48 ms | 6575.34 ms |
Genres at 73 BPM
73 BPM is a slow tempo; many listeners will also hear it at double-time. It sits in the middle of the ambient/downtempo range (60–100), near the low end of the hip-hop range (70–100) and near the low end of the reggae/dub range (70–100).
Counted at double-time (146 BPM) it matches techno and hardstyle. A detector or a tag in your library may report either reading, so check by ear which one the drums suggest.
These ranges are common practice rather than rules: genre is decided by rhythm, sound and scene as much as by tempo, and plenty of tracks sit outside the usual numbers.
- Ambient/downtempo: typically 60–100 BPM — beatless ambient may not have a useful BPM at all.
- Hip-hop: typically 70–100 BPM — boom-bap often sits around 85–95.
- Reggae/dub: typically 70–100 BPM — the off-beat skank can make the pulse feel faster than it is.
Mixing into 73 BPM
To bring a track at another tempo up or down to 73 BPM, move its pitch fader by the percentage below. Without key lock the key moves too, by the number of semitones shown; about 6 % is one semitone, so changes beyond that are where key lock (master tempo) starts to matter.
A ±8 % pitch fader on a track at 73 BPM reaches 67.2–78.8 BPM; a ±16 % range reaches 61.3–84.7 BPM.
| Track tempo | Pitch change to reach 73 | Key shift without key lock |
|---|---|---|
| 67 BPM | +8.96 % | +1.48 st |
| 69 BPM | +5.8 % | +0.98 st |
| 71 BPM | +2.82 % | +0.48 st |
| 72 BPM | +1.39 % | +0.24 st |
| 74 BPM | −1.35 % | −0.24 st |
| 75 BPM | −2.67 % | −0.47 st |
| 77 BPM | −5.19 % | −0.92 st |
| 79 BPM | −7.59 % | −1.37 st |
Half-time, double-time and nearby tempos
Half-time of 73 BPM is 36.5 BPM and double-time is 146 BPM.
36.5 BPM is outside the 60–200 range of these pages; the half/double-time converter works with any value.
Each 1 BPM step at this tempo changes the beat by about 11.11 ms, so neighbouring tempos are close enough to beatmatch with a small pitch move.
Frequently asked questions
- How many milliseconds is one beat at 73 BPM?
- One beat (a quarter note) at 73 BPM is 60,000 ÷ 73 = 821.92 ms. A 4/4 bar is four beats, 3287.67 ms.
- What is the dotted eighth delay time at 73 BPM?
- A dotted 1/8 delay at 73 BPM is 616.44 ms: an eighth note (410.96 ms) multiplied by 1.5. A straight quarter-note delay is 821.92 ms and a quarter-note triplet is 547.95 ms.
- What genre is 73 BPM?
- Ambient/downtempo, hip-hop and reggae/dub commonly use 73 BPM. Genre ranges overlap, so the drum pattern and sound decide the style more than the number does.
- What is 73 BPM in Hz?
- 73 BPM is 1.2167 Hz when one cycle equals one beat. An LFO synced to one bar runs at 0.3042 Hz, and one synced to sixteenth notes at 4.867 Hz.