66 BPM
66 beats per minute is one beat every 909.09 ms. Below: bar and phrase lengths, delay and reverb times, LFO rates, the genres that use this tempo, and the pitch change needed to mix in from nearby tempos. Start the metronome or tap along to a track to check it is really 66.
Updated 2026-10-17
66 BPM
The interactive tool loads when JavaScript is available. The complete guide remains readable below.
Beat, bar and phrase lengths at 66 BPM
At 66 BPM one beat lasts 909.09 ms and a 4/4 bar lasts 3.636 s. The beat is not a whole number of milliseconds, so round to the nearest 0.1 ms when you type times in by hand, or use your plugin's tempo sync. That is 1.1 beats per second, or 16.5 bars of 4/4 per minute.
Dance tracks are usually arranged in 8-, 16- and 32-bar phrases. At 66 BPM a 16-bar phrase takes 58.18 s and a 32-bar intro or outro takes 1:56.4 min. That is 26.18 s longer than the same 16 bars at 120 BPM. A six-minute track at this tempo contains about 99 bars.
| Length | Time | Milliseconds |
|---|---|---|
| 1 beat | 0.909 s | 909.09 ms |
| 1 bar (4 beats) | 3.636 s | 3636.36 ms |
| 4 bars | 14.55 s | 14545.45 ms |
| 8 bars | 29.09 s | 29090.91 ms |
| 16 bars | 58.18 s | 58181.82 ms |
| 32 bars | 1:56.4 min | 116363.64 ms |
| 64 bars | 3:52.7 min | 232727.27 ms |
Delay times at 66 BPM
Straight values follow the beat; dotted values are 1.5 times as long and triplets are two-thirds as long. At 66 BPM the popular dotted-eighth delay is 681.82 ms and a quarter-note slapback is 909.09 ms. The Hz column is the matching rate for an LFO, tremolo or auto-pan synced to the straight note.
| Note | Straight | Dotted | Triplet | Rate (straight) |
|---|---|---|---|---|
| 1/1 (one 4/4 bar) | 3636.36 ms | 5454.55 ms | 2424.24 ms | 0.275 Hz |
| 1/2 | 1818.18 ms | 2727.27 ms | 1212.12 ms | 0.55 Hz |
| 1/4 (one beat) | 909.09 ms | 1363.64 ms | 606.06 ms | 1.1 Hz |
| 1/8 | 454.55 ms | 681.82 ms | 303.03 ms | 2.2 Hz |
| 1/16 | 227.27 ms | 340.91 ms | 151.52 ms | 4.4 Hz |
| 1/32 | 113.64 ms | 170.45 ms | 75.76 ms | 8.8 Hz |
Reverb times at 66 BPM
A common way to keep a reverb in time is to tie its pre-delay to a short note value and let the tail fade within a longer one. At 66 BPM a 1/64-note pre-delay is 56.82 ms and a 1/32-note pre-delay is 113.64 ms.
The decay control on most reverbs is RT60, the time it takes the tail to fall by 60 dB, so the audible tail ends earlier than the number shown. Treat these values as starting points and adjust by ear.
| Reverb character | Pre-delay | Decay (RT60) |
|---|---|---|
| Tight room on drums | 56.82 ms | 909.09 ms |
| Medium plate on vocals | 113.64 ms | 1818.18 ms |
| Large hall or pad wash | 113.64 ms | 3636.36 ms |
| Ambient tail over two bars | 227.27 ms | 7272.73 ms |
Genres at 66 BPM
66 BPM is a slow tempo; many listeners will also hear it at double-time. It sits near the low end of the ambient/downtempo range (60–100).
Counted at double-time (132 BPM) it matches UK garage/breakbeat, techno and trance. A detector or a tag in your library may report either reading, so check by ear which one the drums suggest.
These ranges are common practice rather than rules: genre is decided by rhythm, sound and scene as much as by tempo, and plenty of tracks sit outside the usual numbers.
- Ambient/downtempo: typically 60–100 BPM — beatless ambient may not have a useful BPM at all.
Mixing into 66 BPM
To bring a track at another tempo up or down to 66 BPM, move its pitch fader by the percentage below. Without key lock the key moves too, by the number of semitones shown; about 6 % is one semitone, so changes beyond that are where key lock (master tempo) starts to matter.
A ±8 % pitch fader on a track at 66 BPM reaches 60.7–71.3 BPM; a ±16 % range reaches 55.4–76.6 BPM.
| Track tempo | Pitch change to reach 66 | Key shift without key lock |
|---|---|---|
| 60 BPM | +10 % | +1.65 st |
| 62 BPM | +6.45 % | +1.08 st |
| 64 BPM | +3.13 % | +0.53 st |
| 65 BPM | +1.54 % | +0.26 st |
| 67 BPM | −1.49 % | −0.26 st |
| 68 BPM | −2.94 % | −0.52 st |
| 70 BPM | −5.71 % | −1.02 st |
| 72 BPM | −8.33 % | −1.51 st |
Half-time, double-time and nearby tempos
Half-time of 66 BPM is 33 BPM and double-time is 132 BPM.
33 BPM is outside the 60–200 range of these pages; the half/double-time converter works with any value.
Each 1 BPM step at this tempo changes the beat by about 13.57 ms, so neighbouring tempos are close enough to beatmatch with a small pitch move.
Frequently asked questions
- How many milliseconds is one beat at 66 BPM?
- One beat (a quarter note) at 66 BPM is 60,000 ÷ 66 = 909.09 ms. A 4/4 bar is four beats, 3636.36 ms.
- What is the dotted eighth delay time at 66 BPM?
- A dotted 1/8 delay at 66 BPM is 681.82 ms: an eighth note (454.55 ms) multiplied by 1.5. A straight quarter-note delay is 909.09 ms and a quarter-note triplet is 606.06 ms.
- What genre is 66 BPM?
- Ambient/downtempo commonly uses 66 BPM. Genre ranges overlap, so the drum pattern and sound decide the style more than the number does.
- What is 66 BPM in Hz?
- 66 BPM is 1.1 Hz when one cycle equals one beat. An LFO synced to one bar runs at 0.275 Hz, and one synced to sixteenth notes at 4.4 Hz.