190 BPM
190 beats per minute is one beat every 315.79 ms. Below: bar and phrase lengths, delay and reverb times, LFO rates, the genres that use this tempo, and the pitch change needed to mix in from nearby tempos. Start the metronome or tap along to a track to check it is really 190.
Updated 2026-10-17
190 BPM
The interactive tool loads when JavaScript is available. The complete guide remains readable below.
Beat, bar and phrase lengths at 190 BPM
At 190 BPM one beat lasts 315.79 ms and a 4/4 bar lasts 1.263 s. The beat is not a whole number of milliseconds, so round to the nearest 0.1 ms when you type times in by hand, or use your plugin's tempo sync. That is 3.167 beats per second, or 47.5 bars of 4/4 per minute.
Dance tracks are usually arranged in 8-, 16- and 32-bar phrases. At 190 BPM a 16-bar phrase takes 20.21 s and a 32-bar intro or outro takes 40.42 s. That is 11.79 s shorter than the same 16 bars at 120 BPM. A six-minute track at this tempo contains about 285 bars.
| Length | Time | Milliseconds |
|---|---|---|
| 1 beat | 0.316 s | 315.79 ms |
| 1 bar (4 beats) | 1.263 s | 1263.16 ms |
| 4 bars | 5.053 s | 5052.63 ms |
| 8 bars | 10.11 s | 10105.26 ms |
| 16 bars | 20.21 s | 20210.53 ms |
| 32 bars | 40.42 s | 40421.05 ms |
| 64 bars | 1:20.8 min | 80842.11 ms |
Delay times at 190 BPM
Straight values follow the beat; dotted values are 1.5 times as long and triplets are two-thirds as long. At 190 BPM the popular dotted-eighth delay is 236.84 ms and a quarter-note slapback is 315.79 ms. The Hz column is the matching rate for an LFO, tremolo or auto-pan synced to the straight note.
| Note | Straight | Dotted | Triplet | Rate (straight) |
|---|---|---|---|---|
| 1/1 (one 4/4 bar) | 1263.16 ms | 1894.74 ms | 842.11 ms | 0.792 Hz |
| 1/2 | 631.58 ms | 947.37 ms | 421.05 ms | 1.583 Hz |
| 1/4 (one beat) | 315.79 ms | 473.68 ms | 210.53 ms | 3.167 Hz |
| 1/8 | 157.89 ms | 236.84 ms | 105.26 ms | 6.333 Hz |
| 1/16 | 78.95 ms | 118.42 ms | 52.63 ms | 12.667 Hz |
| 1/32 | 39.47 ms | 59.21 ms | 26.32 ms | 25.333 Hz |
Reverb times at 190 BPM
A common way to keep a reverb in time is to tie its pre-delay to a short note value and let the tail fade within a longer one. At 190 BPM a 1/64-note pre-delay is 19.74 ms and a 1/32-note pre-delay is 39.47 ms.
The decay control on most reverbs is RT60, the time it takes the tail to fall by 60 dB, so the audible tail ends earlier than the number shown. Treat these values as starting points and adjust by ear.
| Reverb character | Pre-delay | Decay (RT60) |
|---|---|---|
| Tight room on drums | 19.74 ms | 315.79 ms |
| Medium plate on vocals | 39.47 ms | 631.58 ms |
| Large hall or pad wash | 39.47 ms | 1263.16 ms |
| Ambient tail over two bars | 78.95 ms | 2526.32 ms |
Genres at 190 BPM
190 BPM is a very fast tempo, usually heard at half-time unless the style is hardcore. It sits near the upper end of the hardcore/gabber range (160–200).
Heard at half-time (95 BPM) it lines up with ambient/downtempo, hip-hop, reggae/dub, reggaeton/dembow and pop. A detector or a tag in your library may report either reading, so check by ear which one the drums suggest.
These ranges are common practice rather than rules: genre is decided by rhythm, sound and scene as much as by tempo, and plenty of tracks sit outside the usual numbers.
- Hardcore/gabber: typically 160–200 BPM — speedcore and some gabber go well beyond 200.
Mixing into 190 BPM
To bring a track at another tempo up or down to 190 BPM, move its pitch fader by the percentage below. Without key lock the key moves too, by the number of semitones shown; about 6 % is one semitone, so changes beyond that are where key lock (master tempo) starts to matter.
A ±8 % pitch fader on a track at 190 BPM reaches 174.8–205.2 BPM; a ±16 % range reaches 159.6–220.4 BPM.
| Track tempo | Pitch change to reach 190 | Key shift without key lock |
|---|---|---|
| 184 BPM | +3.26 % | +0.56 st |
| 186 BPM | +2.15 % | +0.37 st |
| 188 BPM | +1.06 % | +0.18 st |
| 189 BPM | +0.53 % | +0.09 st |
| 191 BPM | −0.52 % | −0.09 st |
| 192 BPM | −1.04 % | −0.18 st |
| 194 BPM | −2.06 % | −0.36 st |
| 196 BPM | −3.06 % | −0.54 st |
Half-time, double-time and nearby tempos
Half-time of 190 BPM is 95 BPM and double-time is 380 BPM.
380 BPM is outside the 60–200 range of these pages; the half/double-time converter works with any value.
Each 1 BPM step at this tempo changes the beat by about 1.65 ms, so neighbouring tempos are close enough to beatmatch with a small pitch move.
Frequently asked questions
- How many milliseconds is one beat at 190 BPM?
- One beat (a quarter note) at 190 BPM is 60,000 ÷ 190 = 315.79 ms. A 4/4 bar is four beats, 1263.16 ms.
- What is the dotted eighth delay time at 190 BPM?
- A dotted 1/8 delay at 190 BPM is 236.84 ms: an eighth note (157.89 ms) multiplied by 1.5. A straight quarter-note delay is 315.79 ms and a quarter-note triplet is 210.53 ms.
- What genre is 190 BPM?
- Hardcore/gabber commonly uses 190 BPM. Genre ranges overlap, so the drum pattern and sound decide the style more than the number does.
- What is 190 BPM in Hz?
- 190 BPM is 3.1667 Hz when one cycle equals one beat. An LFO synced to one bar runs at 0.7917 Hz, and one synced to sixteenth notes at 12.667 Hz.