111 BPM
111 beats per minute is one beat every 540.54 ms. Below: bar and phrase lengths, delay and reverb times, LFO rates, the genres that use this tempo, and the pitch change needed to mix in from nearby tempos. Start the metronome or tap along to a track to check it is really 111.
Updated 2026-10-17
111 BPM
The interactive tool loads when JavaScript is available. The complete guide remains readable below.
Beat, bar and phrase lengths at 111 BPM
At 111 BPM one beat lasts 540.54 ms and a 4/4 bar lasts 2.162 s. The beat is not a whole number of milliseconds, so round to the nearest 0.1 ms when you type times in by hand, or use your plugin's tempo sync. That is 1.85 beats per second, or 27.75 bars of 4/4 per minute.
Dance tracks are usually arranged in 8-, 16- and 32-bar phrases. At 111 BPM a 16-bar phrase takes 34.59 s and a 32-bar intro or outro takes 1:09.2 min. That is 2.59 s longer than the same 16 bars at 120 BPM. A six-minute track at this tempo contains about 167 bars.
| Length | Time | Milliseconds |
|---|---|---|
| 1 beat | 0.541 s | 540.54 ms |
| 1 bar (4 beats) | 2.162 s | 2162.16 ms |
| 4 bars | 8.649 s | 8648.65 ms |
| 8 bars | 17.3 s | 17297.3 ms |
| 16 bars | 34.59 s | 34594.59 ms |
| 32 bars | 1:09.2 min | 69189.19 ms |
| 64 bars | 2:18.4 min | 138378.38 ms |
Delay times at 111 BPM
Straight values follow the beat; dotted values are 1.5 times as long and triplets are two-thirds as long. At 111 BPM the popular dotted-eighth delay is 405.41 ms and a quarter-note slapback is 540.54 ms. The Hz column is the matching rate for an LFO, tremolo or auto-pan synced to the straight note.
| Note | Straight | Dotted | Triplet | Rate (straight) |
|---|---|---|---|---|
| 1/1 (one 4/4 bar) | 2162.16 ms | 3243.24 ms | 1441.44 ms | 0.463 Hz |
| 1/2 | 1081.08 ms | 1621.62 ms | 720.72 ms | 0.925 Hz |
| 1/4 (one beat) | 540.54 ms | 810.81 ms | 360.36 ms | 1.85 Hz |
| 1/8 | 270.27 ms | 405.41 ms | 180.18 ms | 3.7 Hz |
| 1/16 | 135.14 ms | 202.7 ms | 90.09 ms | 7.4 Hz |
| 1/32 | 67.57 ms | 101.35 ms | 45.05 ms | 14.8 Hz |
Reverb times at 111 BPM
A common way to keep a reverb in time is to tie its pre-delay to a short note value and let the tail fade within a longer one. At 111 BPM a 1/64-note pre-delay is 33.78 ms and a 1/32-note pre-delay is 67.57 ms.
The decay control on most reverbs is RT60, the time it takes the tail to fall by 60 dB, so the audible tail ends earlier than the number shown. Treat these values as starting points and adjust by ear.
| Reverb character | Pre-delay | Decay (RT60) |
|---|---|---|
| Tight room on drums | 33.78 ms | 540.54 ms |
| Medium plate on vocals | 67.57 ms | 1081.08 ms |
| Large hall or pad wash | 67.57 ms | 2162.16 ms |
| Ambient tail over two bars | 135.14 ms | 4324.32 ms |
Genres at 111 BPM
111 BPM is a moderate tempo, a little below the usual club range. It sits in the middle of the pop range (90–130) and near the low end of the disco range (105–130).
These ranges are common practice rather than rules: genre is decided by rhythm, sound and scene as much as by tempo, and plenty of tracks sit outside the usual numbers.
- Pop: typically 90–130 BPM — a wide band; the genre is defined by songwriting, not tempo.
- Disco: typically 105–130 BPM — steady four-on-the-floor sections are easy to count.
Mixing into 111 BPM
To bring a track at another tempo up or down to 111 BPM, move its pitch fader by the percentage below. Without key lock the key moves too, by the number of semitones shown; about 6 % is one semitone, so changes beyond that are where key lock (master tempo) starts to matter.
A ±8 % pitch fader on a track at 111 BPM reaches 102.1–119.9 BPM; a ±16 % range reaches 93.2–128.8 BPM.
| Track tempo | Pitch change to reach 111 | Key shift without key lock |
|---|---|---|
| 105 BPM | +5.71 % | +0.96 st |
| 107 BPM | +3.74 % | +0.64 st |
| 109 BPM | +1.83 % | +0.31 st |
| 110 BPM | +0.91 % | +0.16 st |
| 112 BPM | −0.89 % | −0.16 st |
| 113 BPM | −1.77 % | −0.31 st |
| 115 BPM | −3.48 % | −0.61 st |
| 117 BPM | −5.13 % | −0.91 st |
Half-time, double-time and nearby tempos
Half-time of 111 BPM is 55.5 BPM and double-time is 222 BPM.
55.5 BPM and 222 BPM are outside the 60–200 range of these pages; the half/double-time converter works with any value.
Each 1 BPM step at this tempo changes the beat by about 4.83 ms, so neighbouring tempos are close enough to beatmatch with a small pitch move.
Frequently asked questions
- How many milliseconds is one beat at 111 BPM?
- One beat (a quarter note) at 111 BPM is 60,000 ÷ 111 = 540.54 ms. A 4/4 bar is four beats, 2162.16 ms.
- What is the dotted eighth delay time at 111 BPM?
- A dotted 1/8 delay at 111 BPM is 405.41 ms: an eighth note (270.27 ms) multiplied by 1.5. A straight quarter-note delay is 540.54 ms and a quarter-note triplet is 360.36 ms.
- What genre is 111 BPM?
- Pop and disco commonly use 111 BPM. Genre ranges overlap, so the drum pattern and sound decide the style more than the number does.
- What is 111 BPM in Hz?
- 111 BPM is 1.85 Hz when one cycle equals one beat. An LFO synced to one bar runs at 0.4625 Hz, and one synced to sixteenth notes at 7.4 Hz.