107 BPM
107 beats per minute is one beat every 560.75 ms. Below: bar and phrase lengths, delay and reverb times, LFO rates, the genres that use this tempo, and the pitch change needed to mix in from nearby tempos. Start the metronome or tap along to a track to check it is really 107.
Updated 2026-10-17
107 BPM
The interactive tool loads when JavaScript is available. The complete guide remains readable below.
Beat, bar and phrase lengths at 107 BPM
At 107 BPM one beat lasts 560.75 ms and a 4/4 bar lasts 2.243 s. The beat is not a whole number of milliseconds, so round to the nearest 0.1 ms when you type times in by hand, or use your plugin's tempo sync. That is 1.783 beats per second, or 26.75 bars of 4/4 per minute.
Dance tracks are usually arranged in 8-, 16- and 32-bar phrases. At 107 BPM a 16-bar phrase takes 35.89 s and a 32-bar intro or outro takes 1:11.8 min. That is 3.89 s longer than the same 16 bars at 120 BPM. A six-minute track at this tempo contains about 161 bars.
| Length | Time | Milliseconds |
|---|---|---|
| 1 beat | 0.561 s | 560.75 ms |
| 1 bar (4 beats) | 2.243 s | 2242.99 ms |
| 4 bars | 8.972 s | 8971.96 ms |
| 8 bars | 17.94 s | 17943.93 ms |
| 16 bars | 35.89 s | 35887.85 ms |
| 32 bars | 1:11.8 min | 71775.7 ms |
| 64 bars | 2:23.6 min | 143551.4 ms |
Delay times at 107 BPM
Straight values follow the beat; dotted values are 1.5 times as long and triplets are two-thirds as long. At 107 BPM the popular dotted-eighth delay is 420.56 ms and a quarter-note slapback is 560.75 ms. The Hz column is the matching rate for an LFO, tremolo or auto-pan synced to the straight note.
| Note | Straight | Dotted | Triplet | Rate (straight) |
|---|---|---|---|---|
| 1/1 (one 4/4 bar) | 2242.99 ms | 3364.49 ms | 1495.33 ms | 0.446 Hz |
| 1/2 | 1121.5 ms | 1682.24 ms | 747.66 ms | 0.892 Hz |
| 1/4 (one beat) | 560.75 ms | 841.12 ms | 373.83 ms | 1.783 Hz |
| 1/8 | 280.37 ms | 420.56 ms | 186.92 ms | 3.567 Hz |
| 1/16 | 140.19 ms | 210.28 ms | 93.46 ms | 7.133 Hz |
| 1/32 | 70.09 ms | 105.14 ms | 46.73 ms | 14.267 Hz |
Reverb times at 107 BPM
A common way to keep a reverb in time is to tie its pre-delay to a short note value and let the tail fade within a longer one. At 107 BPM a 1/64-note pre-delay is 35.05 ms and a 1/32-note pre-delay is 70.09 ms.
The decay control on most reverbs is RT60, the time it takes the tail to fall by 60 dB, so the audible tail ends earlier than the number shown. Treat these values as starting points and adjust by ear.
| Reverb character | Pre-delay | Decay (RT60) |
|---|---|---|
| Tight room on drums | 35.05 ms | 560.75 ms |
| Medium plate on vocals | 70.09 ms | 1121.5 ms |
| Large hall or pad wash | 70.09 ms | 2242.99 ms |
| Ambient tail over two bars | 140.19 ms | 4485.98 ms |
Genres at 107 BPM
107 BPM is a moderate tempo, a little below the usual club range. It sits in the middle of the pop range (90–130) and near the low end of the disco range (105–130).
These ranges are common practice rather than rules: genre is decided by rhythm, sound and scene as much as by tempo, and plenty of tracks sit outside the usual numbers.
- Pop: typically 90–130 BPM — a wide band; the genre is defined by songwriting, not tempo.
- Disco: typically 105–130 BPM — steady four-on-the-floor sections are easy to count.
Mixing into 107 BPM
To bring a track at another tempo up or down to 107 BPM, move its pitch fader by the percentage below. Without key lock the key moves too, by the number of semitones shown; about 6 % is one semitone, so changes beyond that are where key lock (master tempo) starts to matter.
A ±8 % pitch fader on a track at 107 BPM reaches 98.4–115.6 BPM; a ±16 % range reaches 89.9–124.1 BPM.
| Track tempo | Pitch change to reach 107 | Key shift without key lock |
|---|---|---|
| 101 BPM | +5.94 % | +1 st |
| 103 BPM | +3.88 % | +0.66 st |
| 105 BPM | +1.9 % | +0.33 st |
| 106 BPM | +0.94 % | +0.16 st |
| 108 BPM | −0.93 % | −0.16 st |
| 109 BPM | −1.83 % | −0.32 st |
| 111 BPM | −3.6 % | −0.64 st |
| 113 BPM | −5.31 % | −0.94 st |
Half-time, double-time and nearby tempos
Half-time of 107 BPM is 53.5 BPM and double-time is 214 BPM.
53.5 BPM and 214 BPM are outside the 60–200 range of these pages; the half/double-time converter works with any value.
Each 1 BPM step at this tempo changes the beat by about 5.19 ms, so neighbouring tempos are close enough to beatmatch with a small pitch move.
Frequently asked questions
- How many milliseconds is one beat at 107 BPM?
- One beat (a quarter note) at 107 BPM is 60,000 ÷ 107 = 560.75 ms. A 4/4 bar is four beats, 2242.99 ms.
- What is the dotted eighth delay time at 107 BPM?
- A dotted 1/8 delay at 107 BPM is 420.56 ms: an eighth note (280.37 ms) multiplied by 1.5. A straight quarter-note delay is 560.75 ms and a quarter-note triplet is 373.83 ms.
- What genre is 107 BPM?
- Pop and disco commonly use 107 BPM. Genre ranges overlap, so the drum pattern and sound decide the style more than the number does.
- What is 107 BPM in Hz?
- 107 BPM is 1.7833 Hz when one cycle equals one beat. An LFO synced to one bar runs at 0.4458 Hz, and one synced to sixteenth notes at 7.133 Hz.